How to Store and Frame Your Eye of the Ocean Uncut Sheets
By Stockholm17 | Find the Best Playing Cards, Books, and | Published: 2026-11-01
Category: How-to Guides
A practical, step-by-step routine for storing and framing your Eye of the Ocean Part One uncut sheet, from flattening and light protection to mounting and long-term checks.
Quick answer
Store your Eye of the Ocean Part One uncut sheet flat, dry, and out of direct light until you frame it. Then mount it with archival, non-adhesive materials behind UV-filtering glazing, and keep it away from humid walls and sunny spots.
Why the sheet's size and print area shape your storage plan
The Eye of the Ocean uncut sheet measures roughly 75 x 54 cm, with a print area of about 72.7 x 47 cm. That leaves a narrow margin around the printed design, so any storage method that presses, folds, or clips the edges can leave marks close to the artwork. Plan for a flat surface larger than the full sheet, not just the print area.
Because the sheet is large and thin, it is more vulnerable to bending and edge creasing than a small print. A rigid backing board or a wide, flat portfolio is safer than rolling it tightly or leaning it in a crowded shelf.
Light and humidity are the slow threats
Ultraviolet light fades inks over time, and humidity can warp paper and encourage mold. A sunny wall, a window-adjacent shelf, or a damp exterior wall are all poor long-term locations. Even indirect daylight adds up over months, so treat light protection as part of storage, not only framing.
If you live in a humid climate or plan to store the sheet for a long period, use a dehumidifier or silica packs in the storage area and check the sheet periodically. Avoid sealing a damp sheet inside a frame; let it acclimatize to a dry room first.
What to avoid when framing
Adhesive tape, dry-mounting tissue, and spray adhesives can stain or bond permanently to the paper. Avoid pressing the sheet directly against glass, which can trap moisture and cause sticking. Standard glass offers little UV protection, so choose UV-filtering glazing if the display will receive any daylight.
The sheet's narrow margins mean the mount should support it from behind or with archival corners, not with visible clips or tape on the printed area. Keep the frame deep enough that the glazing does not touch the sheet.
Step-by-step: store and frame your Eye of the Ocean uncut sheet
- Unpack and inspect flat: Open the shipping tube on a clean, dry table and let the sheet relax flat. Place it print-side up under a clean board or sheet of archival paper to keep dust off while it acclimatizes. Common mistake: unrolling it immediately and leaving it curled, which can set a wave in the paper. Check for edge creases or tube marks before you plan the frame; note any existing damage so you do not blame the mount later.
- Choose a flat, dark, dry storage spot: Store the sheet flat in a wide portfolio or between two rigid boards in a room with stable humidity, away from windows, radiators, and exterior walls. Add silica packs if the space feels damp. Common mistake: leaning the sheet vertically against a wall, which encourages bowing. If you cannot store it flat, use a rigid portfolio rather than rolling it tightly.
- Measure the full sheet, not just the print: Measure the entire 75 x 54 cm sheet and add at least 2–3 cm of mat overlap on each side for the frame. Confirm the frame depth leaves a gap between the glazing and the sheet. Common mistake: sizing the frame to the 72.7 x 47 cm print area, which leaves no room for a safe mount. Write the frame dimensions down before ordering; the narrow margins leave little room for error.
- Mount with archival, non-adhesive materials: Use acid-free backing board and archival photo corners or hinging strips placed on the back margins, not on the printed area. Avoid tape, glue, and dry-mount tissue. Common mistake: pressing the sheet directly against glass to keep it flat, which risks sticking and moisture traps. If the sheet will not sit flat, add a shallow spacer rather than forcing it against the glazing.
- Install UV-filtering glazing and seal the back: Choose UV-filtering glass or acrylic and seal the frame back with acid-free backing and a dust cover. Hang the frame away from direct sun and damp walls. Common mistake: using standard glass in a bright room and assuming the frame protects the inks. UV glazing slows fading but does not stop it; keep the frame out of direct sun anyway.
- Set a seasonal check: Every few months, check the frame for condensation, dust behind the glazing, and any sign of the sheet shifting. In humid seasons, run a dehumidifier nearby. Common mistake: never looking behind the frame until damage is visible from the front. If you see condensation or rippling, move the frame to a drier spot and let it stabilize before reframing.
Product facts
- The Eye of the Ocean Part One - Uncut Sheets: The Eye of the Ocean Part One uncut sheet is about 75 x 54 cm with a print area of roughly 72.7 x 47 cm, and the Intrepid uncut sheet was not produced. The large format and narrow margins mean you need a flat storage surface and a frame larger than the print area, and the Intrepid sheet's absence makes this Part One sheet the relevant one to plan around.
The Eye of the Ocean Part One - Uncut Sheets
