How to Use the Odd Fellows Brass Monkey Patch on a Jacket

By Stockholm17 | Find the Best Playing Cards, Books, and | Published: 2026-10-28

Category: How-to Guides

Learn how to apply the Odd Fellows embroidered Brass Monkey patch to a jacket with our step-by-step guide, including iron-on and sewing methods, plus tips to avoid common mistakes.

Quick Answer

To attach the Odd Fellows Brass Monkey patch to a jacket, use the iron-on method for a quick bond or sew it for a permanent hold. Always pre-test the fabric and position the patch carefully before applying heat or stitches.

Iron-On vs. Sewing: Which Method Should You Choose?

The Odd Fellows Brass Monkey patch features a heat-activated adhesive backing, making iron-on application the fastest option. However, iron-on bonds can weaken over time, especially with frequent washing or heavy wear. Sewing provides a more durable attachment and is often recommended for denim jackets that see regular use.

For a balanced approach, you can iron the patch first to set it in place, then reinforce the edges with a few stitches. This combination gives you the convenience of iron-on with the security of sewing.

Always check the fabric of your jacket. Some materials, like nylon or polyester, may not withstand the heat required for iron-on application. In such cases, sewing is the safer choice.

Step-by-Step Patch Application

Gather Your Supplies: You'll need the patch, a clean jacket, an iron, a pressing cloth (or thin cotton towel), and a flat, heat-safe surface. If sewing, have a needle and thread in a matching color. Ensure the iron is set to the appropriate heat setting for your fabric (usually cotton or wool, no steam).
Pre-Test the Fabric: Test the iron on an inconspicuous area of the jacket to ensure it can handle the heat. If the fabric melts or scorches, switch to sewing. If the fabric is synthetic, skip the iron and go straight to sewing.
Position the Patch: Place the patch on the jacket in your desired spot. Use pins or fabric chalk to mark the position, and step back to check alignment before committing. Double-check the placement from a distance; once ironed or sewn, it's hard to move.
Iron-On Application: Cover the patch with a pressing cloth and press the iron firmly over it for 15-20 seconds. Do not slide the iron; use a pressing motion. Let it cool completely before moving the jacket. If the patch doesn't adhere fully, repeat the pressing, but avoid over-ironing which can damage the embroidery.
Sewing for Durability: If sewing, thread your needle and sew around the edge of the patch using a whip stitch or blanket stitch. Keep stitches small and even for a clean look. Sewing is the only method that guarantees the patch stays put after many washes.
Final Check and Care: After application, check that the patch is securely attached. For iron-on patches, wait 24-48 hours before washing. Turn the jacket inside out and wash on a gentle cycle. Avoid dry cleaning or high-heat drying, which can weaken the adhesive.

The Patch at a Glance

Odd Fellows: embroided patch Brass Monkey: The Odd Fellows Brass Monkey patch is a round embroidered patch with a diameter of 100mm, featuring a Brass Monkey design and heat application backing. Its size and heat-activated backing make it versatile for placement on jackets, bags, or hats, and the iron-on method is quick and straightforward.
Odd Fellows: embroided patch Brass Monkey