This PDF is a build brief, not a flat-pack kit
The Stockholm17 Technical Drawing is a digital download in PDF format. It gives your trusted woodworker the technical specs to make a wall-mounted display for playing cards. Nothing physical ships, so the setup starts with a conversation with your woodworker, not with a screwdriver.
That changes the order of work. You choose the shelf length, shelf count, wood, stain and finish first, then decide where the finished piece will hang. The placement decision is easier once you know how much the loaded display will weigh.
What the drawing actually specifies
- Playing Card Display - Technical Drawing: Technical Drawing in PDF format: digital download. You are buying the plans, not the shelf. Budget for timber, finishing materials and labour separately.

Playing Card Display - Technical Drawing - Playing Card Display - Technical Drawing: Scalable Design: you can increase or reduce the length, and/or increase the number of shelves. Shelf length and shelf count are your variables, so the display can be sized to the wall and to your collection.
- Playing Card Display - Technical Drawing: The design in the PDF holds up to 240 standard decks of playing cards (poker size and bridge size), total weight completely filled reaches 32kg. This is the maximum the drawing supports when fully loaded, and it is the number to use for wall and fixing decisions.
- Playing Card Display - Technical Drawing: Be aware of the total weight when loaded with decks of cards, and choose the plugs accordingly. The fixing choice follows the loaded weight, not the empty shelf weight.
- Playing Card Display - Technical Drawing: It is designed to be hung on the wall with 2 strong plugs, but every wall is different and you need to choose the correct one. Two fixing points are part of the design, but the plug type is a wall-by-wall decision.
- Playing Card Display - Technical Drawing: Notes: metric system, measurements in mm. Tell your woodworker the drawing uses millimetres so the cut list is read correctly.
Set up the build in the right order
- 1. Decide how many decks you want on show: The drawing supports up to 240 standard decks in poker size and bridge size when fully loaded. Work out your realistic number first, because it drives shelf length, shelf count and weight.
- 2. Choose shelf length and shelf count: The design is scalable: you can increase or reduce the length and add or remove shelves. Keep the loaded weight in mind as you scale up, since the 32kg figure applies to the fully filled design.
- 3. Pick wood, stain and finish: The example in the product pictures was made in solid pinewood with oil-based charcoal stain and a final wax-oil to protect the piece. The notes say solid wood can be any of your choice, with staining and finishing of your choice.
- 4. Hand the PDF to your woodworker: The file contains the technical specs for the build. Mention that measurements are metric and in millimetres so nothing is converted by guesswork.
- 5. Plan the wall before the shelf is finished: The design hangs on the wall with 2 strong plugs. Every wall is different, so identify your wall type and choose the correct plug for it before drilling.
Placement decisions that come before drilling
- Check the wall can take the loaded weight: Use the fully loaded figure of 32kg when assessing the wall and choosing plugs. A display that is half empty weighs less, but planning for the full load avoids a later surprise.
- Match the plug to the wall, not to the shelf: The drawing calls for 2 strong plugs but leaves the type to you because walls differ. If you are unsure what your wall is made of, get local advice before fixing.
- Leave room to reach the shelves: You will be adding and removing decks, so place the display where you can reach the shelves comfortably. The drawing does not specify a mounting height, so this is your call based on the room.
- Keep it away from handling traffic: A wall-mounted display is a storage and showcase piece. Siting it out of a busy walkway reduces the chance of knocks to the shelf and the decks on it.
Where this display fits in a collection
This is a display stand for standard decks, not a frame for single cards or uncut sheets. If your collection is mostly sealed decks you want visible, the scalable shelf format suits that job. If you want to show one favourite card, a frame is a different accessory.
The drawing is also a good fit if you already have a woodworker you trust. You get a Stockholm17-designed spec and the freedom to choose the timber and finish, but the build quality and the wall fixing remain your responsibility.
What the supplied information does not settle
- Mounting height and position: The supplied details do not give a recommended height or room position. Choose based on your wall, your reach and the look of the room.
- Plug specification: The drawing says to choose plugs according to the loaded weight and wall type, but the supplied information does not name a specific plug product.
- Finish durability: The example used oil-based stain and wax-oil, but the supplied information does not make claims about how the finish wears over time.


